Car Sound System, Audison

Optical adapter to extend optical cables featuring TOSLINK connectors.

PACKAGE: Polybag – Qty.

RCA connector for effortless and fast connections between the head unit PRE OUTs (2 V min.) and bit Ten, bit Ten D Hi-Level inputs.

Optical digital audio signal cable, designed for car audio applications, allowing the transfer of the optical signal without signal loss. An especially thicker sheath protects the optical fibre to prevent the cable from damages if it is pressed against sharp edges.

Optical digital audio signal cable, designed for car audio applications, allowing the transfer of the optical signal without signal loss. An especially thicker sheath protects the optical fibre to prevent the cable from damages if it is pressed against sharp edges.

With this optional stacking system it is possible to stack up to 3 AP amps to save space without incurring in overheating.

It is a kit composed of a cable and an adapter allowing a 2 m / 78.74 in. additional extension of the cable supplied with the DRC. This extension is required for installations on especially long vehicles such as SUV’s.

SFC provides a solution to the issues related to digital interfacing like in the case of the Digital head-unit having a higher sampling frequency (96/192 kHz) than the receiver that can not handle frequencies higher than 48 kHz.

Stereo passive mixer (unpowered) featuring 4 input channels and 2 output channels, designed for active OEM multi-way systems where each speaker is powered by one specific amplified channel.

It prevents the processor from shutting down when turning on vehicles featuring the start & stop system

Digital Remote Control permits the control of the main system without the use of a PC.

The new Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus.

DRC AB enables the main system control (volume, balance, fader and subwoofer volume, bass-boost) without the use of a PC.

We are proud to present the renovated SR 1.500 (1000 W 1 Ω) introduced back in 1988 and constantly updated with the best technologies available.

We are proud to present the renovated SR 5.600 (75 W x 4 + 330 W x 1 @ 4Ω) introduced back in 1988 and constantly updated with the best technologies available.

We are proud to present the renovated SR 4.500 (130 W x 4 @ 4Ω) introduced back in 1988 and constantly updated with the best technologies available.

We are proud to present the renovated SR 4.300 (85 W x 4 @ 4Ω) introduced back in 1988 and constantly updated with the best technologies available.

The core of the AV 3.0 midrange is a powerful Neodymium magnetic group: efficiency and linearity make it an irreplaceable component to achieve a fine yet dynamic mid range, while its compact size allows versatile and high-performance installations.

The AV 1.1 tweeter features a very light Tetolon membrane, CCAW voice coil wound on double layer and high density Neodymium magnet.

TH 1.5 II Violino is an extraordinary tweeter featuring a 34 mm CCAW single layer voice coil combining light weight, stability at lower frequencies and total absence of musical transients compression.

The extremely powerful custom N38 “H-grade” Neodymium magnet provides 1.

The AP1 D amplifier was designed to drive a subwoofer and is the ideal extension of the AP8.9 bit and AP4.9 bit. At 2 Ohms it is stable and can supply 540 W power with extremely compact dimensions.

The AP4 D amplifier was designed as an extension for the AP 4.9 bit and AP 5.9 bit amplifiers, offering 4 additional 70 W amplified channels.

The AP F1D amplifier was designed to drive the most demanding subwoofer and is the ideal extension of the AP F8.9 bit. At 1 Ohms it is stable and can supply up to 1000 W of power with extremely compact dimension.

AP4.9 bit amplifier is ideal to realize a powerful two way front full active. The built-in processor, that this amplifier shares with the AP8.9 bit, provides the ability to assign the pre-outs to the AP1 D amplifier, creating a very powerful system in a small space thanks to the “rack mounting” system.